Easy Ways to Identify a Swimming Pool Leak

12 May 2022
 Categories: , Blog

Share

Detecting a swimming pool leak can be difficult, but you have to catch a leak early to prevent further damage. A swimming pool leak can cause serious issues, from stains to cracks along the structure.

This post outlines two easy ways to detect a swimming pool leak.

Check the Pool Filter Pressure Gauge

If the pressure is lower than normal, it could be a sign that water is leaking from the pool. When water leaks out of the pool, it has to go somewhere, and oftentimes it will end up in the skimmer box. If the skimmer box is full of water, it's a good indicator that you have a swimming pool leak.

To check the pressure, simply turn off the pump and unscrew the pressure gauge from the side of the filter. If the needle on the gauge is lower than it should be, it's time to check for leaks.

To check the pressure, turn off the pump and remove the filter lid. Then, use a garden hose to fill the swimming pool with water until the skimmer baskets are full. Finally, turn on the pump and check the pressure gauge. If it is lower than normal, there may be a leak in your swimming pool.

Oftentimes, this symptom is usually accompanied by a lower water level in the pool. To check the water level, turn off the pump and remove the deck plate. Then, measure the distance from the top of the swimming pool to the waterline. If the water level is more than a few inches below the skimmer, there may be a leak in your swimming pool.

If you think you have a swimming pool leak, contact a leak detection professional to come and take a look. They will be able to tell you for sure if there is a leak and help you fix it.

Inspect the Swimming Pool Liner for Holes or Rips

If you have a swimming pool with a liner, you should always be keen to look for any holes or rips. A hole in the liner can be caused by many things. For example, a rip in the liner can be caused by a sharp object that has punctured it.

It is also possible for a swimming pool liner to develop a hole due to wear and tear. Over time, the liner will become thinner and weaker. Eventually, it may develop a hole along the weaker sections.

Debris can also cause holes in the liner. When leaves and twigs fall into the swimming pool, they can create small holes. These holes are usually not big enough to cause a major leak. However, if they are not repaired quickly, the holes can become bigger and cause more serious problems.

Inspecting the liner regularly will help you find any holes before they cause too much damage. Start by looking for any breaks along the liner. If you see any, call a swimming pool leak detection expert to come and take a look. They can tell you for sure if there is a hole or rip in your liner and help you fix it.